Kate Middleton and Prince William get cosy by the fireplace
We use your sign-up to provide content in ways you’ve consented to and to improve our understanding of you. This may include adverts from us and 3rd parties based on our understanding. You can unsubscribe at any time. More info
Cleaning your log burner glass is a tricky task when tackling the blackened stains left after a luxurious evening of warmth and amber flames. While smoke and dirty-looking glass can’t be avoided all the time you’re using your log burner, keeping it clean can be easier than you might think and requires just a few tools for that in-between clean throughout the winter.
How to clean log burner glass
Setting out to clean your log burner glass should only be done when the surface is not in use and has been left to cool down to a safe to touch temperature.
There are a few home remedies you can use to clean up the glass of your log burner in order to see the flames flickering through it once again.
Newspaper and ashes
You can clean your glass burner using the remnants of the wood produced when burning.
Always save the leftover wood ashes and leave them cool before using them as a completely natural exfoliant for your log burner glass.
Wipe down the cool glass surface with soap, warm water and a microfiber cloth before utilising the ashes for a deep clean.
Scrunch up a few sheets of newspaper into balls and dip into a bowl of water before dipping into a bowl of wood ashes.
Lightly scrub the glass with your ashy newspaper and rub in circular motions – repeating until you see the dirt begin to lift and move around the screen.
Wipe away with clean warm water and dry with unused newspaper for a streak-free finish.
Once you’ve tackled the blackened soot layer on your glass surface it’s a good idea to polish for an extra boost of cleanliness and shine.
You can look no further than your kitchen cupboard and reach for the white vinegar.
Mix equal parts white vinegar with warm water in a bowl and use a paper towel to dip into the simple solution before buffing onto the glass of your log burner.
Property experts’ damning prediction for UK housing market [EXPERT]
Gardening expert explains ‘best ways’ to ripen outdoor tomatoes [INSIGHT]
How to stop weeds growing in gravel – the 3 ingredient weedkiller [TIPS]
Take a clean, dry microfiber cloth and give one last wipe over the glass to reveal a super-clean surface.
The cleanest way to use your log burner
Using your log burner correctly is the best way to maintain a clean-looking glass surface.
If you burn the wrong type of wood you may risk an excessively smokey or inefficient log-burning session.
Excessive smoke is the main culprit when it comes to dirty glass on your log burner, as the temperature is raised causing the fuel to burn more quickly and blacken the glass more rapidly.
Experts recommend burning dry seasoned wood, rather than wet wood which produces significantly more smoke when burnt. The best thing you can do to keep the glass on your stove clean is to only burn either dry seasoned wood or low sulphur smokeless coal.
Six top tips for cleaning your wood burner:
- Regularly wipe down the glass in between uses to remove black-stains
- Keep any air vents open that are required for the air wash system on some newer log burners
- Burn dry wood with a low moisture content
- Never leave the fire to smoulder
- Build and maintain fires more towards the back of the stove
- Have hotter fires to help burn off any soot particles
Source: Read Full Article